UTILLAB
Home
About
Β© Copyright 2026Β UtilLab
About usPrivacy Policy

Second per foot [s/ft] to Second per metre [s/m] Converter

Quick Reference

1 Second per foot (s/ft) = 3.280839895 Second per metre (s/m)

1 Second per metre (s/m) = 0.3048 Second per foot (s/ft)

How to Convert Second per foot to Second per metre

1 s/ft = 3.280839895013123 s/m
1 s/m = 0.3048 s/ft

To convert Second per foot to Second per metre, multiply the value by 3.280839895. To convert Second per metre back to Second per foot, divide by 3.280839895.

Example: convert 10 s/ft to s/m:
10 s/ft = 10 x 3.280839895013123 = 32.80839895013123 s/m

↔ Convert Second per metre to Second per foot

Second per foot

Definition: Second per foot (s/ft) is a unit of kinematic viscosity. It represents the time in seconds required for a fluid to flow a distance of one foot under the influence of gravity.

History/origin: The second per foot unit likely arose from practical applications in fields such as hydraulics and fluid dynamics, where measuring flow rates and viscosities was crucial. Its exact origins are difficult to pinpoint but are tied to the development of techniques for quantifying fluid behavior.

Current use: While not as widely used as other viscosity units like centistokes or Pascal-seconds, second per foot may still be encountered in older literature, specific industrial contexts, or specialized applications within engineering and physics related to fluid flow and material characterization.

Second per metre

Definition: Second per metre (s/m) is a unit of pace, expressing the time taken to travel one metre. While less common than minute per kilometre, it's used in specific contexts to measure pace.

History/origin: Second per metre is a straightforward unit derived from the metric system. Its adoption is linked to the need for precise measurement of pace in specialized sports or scientific analysis.

Current use: S/m is used in some biomechanics research to analyze gait and movement efficiency. It may also be used in sprint events or races over short distances where precise time measurements are important.

Second per foot to Second per metre Conversion Table

Second per foot [s/ft]Second per metre [s/m]
1 s/ft3.280839895013123 s/m
2 s/ft6.561679790026246 s/m
5 s/ft16.404199475065614 s/m
10 s/ft32.80839895013123 s/m
20 s/ft65.61679790026245 s/m
50 s/ft164.04199475065616 s/m
100 s/ft328.0839895013123 s/m
200 s/ft656.1679790026246 s/m
500 s/ft1640.4199475065616 s/m
1000 s/ft3280.839895013123 s/m

Common pairs of Pace

Minute per kilometre

Minute per kilometre to Second per metreMinute per kilometre to Minute per mileMinute per kilometre to Second per foot

Second per metre

Second per metre to Minute per kilometreSecond per metre to Minute per mileSecond per metre to Second per foot

Minute per mile

Minute per mile to Minute per kilometreMinute per mile to Second per metreMinute per mile to Second per foot

Second per foot

Second per foot to Minute per kilometreSecond per foot to Second per metreSecond per foot to Minute per mile

Second per foot [s/ft] to Second per metre [s/m] Converter

To convert Second per foot to Second per metre, enter your value in the s/ft field above and the result in s/m will appear instantly. You can also use the conversion factor shown in the table on this page to calculate manually. The formula is always the same: multiply your s/ft value by the fixed conversion ratio to get the equivalent in s/m.
Our Second per foot to Second per metre converter uses standardized conversion factors defined by international scientific and metrological organizations. All calculations are performed with full floating-point precision. You can also choose how many decimal places to display in the result, so you get exactly the level of detail you need.
Yes, absolutely. Simply swap the source and destination units in the converter β€” select s/m as your input unit and s/ft as your output unit. The same precision and standardized conversion factor applies in both directions.
Converting between Second per foot and Second per metre comes up regularly in engineering, scientific research, construction, and everyday tasks that involve measurements from different unit systems. Our converter eliminates the risk of manual calculation errors and saves time whenever you need to switch between these two units.
Yes, the Second per foot to Second per metre converter is completely free. No account or registration is required, and there are no usage limits. It works on any device β€” smartphones, tablets, and desktop computers β€” directly in your browser.
Second per foot and Second per metre are both units used to measure the same physical quantity, but they belong to different measurement systems or represent different scales. The mathematical relationship between them is fixed and constant, which is what makes accurate conversion possible. Scroll up to see the exact conversion factor, formula, and a reference table for common values.